Molecular Formula | C7H6BNO2 |
Molar Mass | 146.94 |
Density | 1.25±0.1 g/cm3(Predicted) |
Melting Point | 298 °C (dec.) (lit.) |
Boling Point | 347.4±44.0 °C(Predicted) |
Flash Point | 163.9°C |
Vapor Presure | 2.04E-05mmHg at 25°C |
Appearance | Pale orange powder |
BRN | 6136720 |
pKa | 7.17±0.10(Predicted) |
Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
Refractive Index | 1.559 |
MDL | MFCD01318967 |
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin. R34 - Causes burns R36 - Irritating to the eyes R41 - Risk of serious damage to eyes R37/38 - Irritating to respiratory system and skin. R22 - Harmful if swallowed |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39 - Wear suitable gloves and eye/face protection S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S22 - Do not breathe dust. S39 - Wear eye / face protection. S36 - Wear suitable protective clothing. |
UN IDs | UN3439 |
WGK Germany | 3 |
HS Code | 29163990 |
Hazard Note | Harmful/Irritant |
Hazard Class | 6.1 |
Packing Group | III |
introduction | 3-cyanophenylboronic acid is a light orange powder with a density of 1.25g/cm3, a boiling point of 347.4 c at 760mmHg, and a melting point of 298 c (dec.)(lit.), which can be used as an intermediate in organic synthesis, used in organic synthesis and experimental research. |
use | 3-cyanophenylboronic acid is an important chemical raw material. 4-cyanophenylboronic acid diol ester generated by reaction with diols such as neopentyl glycol and 1,3-propylene glycol is an important intermediate in the synthesis of medicine and display materials. |
synthesis method | using 3-cyanobromobenzene as raw material and pinacyl diborate (B2Pin2) as borating agent, 3-cyanophenylboronic acid was prepared under mild reaction conditions through Miyaura borylation reaction, and the effects of different catalysts and bases on the product yield were studied, the products were analyzed and characterized. The synthesis reaction formula is as follows: |